Saturday, November 9, 2013

UK researchers hit 10 gigabit speed using LiFi, LED based data transfer

led
A group of British researchers has taken the lead in the race to provide high-bandwidth network connections via the (mostly) humble light bulb. LiFi founding father Harald Haas and his team have broken the 10Gbps barrier.
Just last week, a Chinese manufacturer showed off a system they’re hoping to commercialize. It’s capable of reaching 150Mbps— not bad, but nowhere near what’s now been accomplished in the UK. Their system Haas’ team has demonstrated utilizes a trio of LEDs (red, green, and blue) which can each push 3.5Gbps.
It’s also a whole lot faster than a similar experimental setup created by researchers from Germany’s Fraunhofer Institute back in April. They managed to achieve around 1Gbps per LED, so the RGB configuration could pump out 3Gbps in total.
The increase in throughput is made possible by the University of Strathclyde’s micro-LED “bulbs.” They’re capable transmitting millions of intensity changes every second, and it’s those intensity changes that pass 0s and 1s to the Li-Fi receiver.
Haas knows there’s a long way to go before Li-Fi is ready for use in the real world. But while some think that the fact that LiFi requires a direct line-of-sight is a disadvantage over today’s wireless networks, Haas sees it as a benefit.
Li-Fi signals would be much trickier to intercept, since their range is much more limited and transmission is blocked by walls. That potential increase in security (however small) ought to be enough to get folks interested what with those bizarre malicious appliances floating around.

'LiFi' uses LEDs for blazing fast data transfer

A new technology called LiFi can transfer data using LED lights. In this video, we’ll watch a demo of a LiFi system made with off-the-shelf-parts, as it streams a vide.
Unlike traditional Wi-Fi routers, which use radio signals, this LiFi system relies on light to send and receive data wirelessly. If you notice an Ethernet cable plugged into the laptops that’s just to get the data from the receiver into the computer.
The problem with Wi-Fi is that it uses radio signals and the amount of radio spectrum is limited. LiFi, however, could be deployed in everyday LED bulbs and cover the entire interior of a home or office. The system on show ran at 150 Mbps, but with a more powerful LED light, it could reach 3.5 Gbps.
Don’t expect LiFi to be in your home or office any time soon. Researchers ay it will take another five years before the technology is ready for commercialization.

Chinese scientists achieve Internet access through lightbulbs

Successful experiments by Chinese scientists have indicated the possibility of the country's netizens getting online through signals sent by lightbulbs (LiFi), instead of WiFi.

Four computers under a one-watt LED lightbulb may connect to the Internet under the principle that light can be used as a carrier instead of traditional radio frequencies, as in WiFi, said Chi Nan, an information technology professor with Shanghai's Fudan University, on Thursday.

A lightbulb with embedded microchips can produce data rates as fast as 150 megabits per second, which is speedier than the average broadband connection in China, said Chi, who leads a LiFi research team including scientists from the Shanghai Institute of Technical Physics of the Chinese Academy of Sciences.

With LiFi cost-effective as well as efficient, netizens should be excited to view 10 sample LiFi kits that will be on display at the China International Industry Fair that will kick off on Nov. 5 in Shanghai.

The current wireless signal transmission equipment is expensive and low in efficiency, said Chi.
"As for cell phones, millions of base stations have been established around the world to strengthen the signal but most of the energy is consumed on their cooling systems," she explained. "The energy utilization rate is only 5 percent."

Compared with base stations, the number of lightbulbs that can be used is practically limitless. Meanwhile, Chinese people are replacing the old-fashioned incandescent bulbs with LED lightbulbs at a fast pace.

"Wherever there is an LED lightbulb, there is an Internet signal," said Chi. "Turn off the light and there is no signal."

However, there is still a long way to go to make LiFi a commercial success.

"If the light is blocked, then the signal will be cut off," said Chi.
More importantly, according to the scientist, the development of a series of key related pieces of technology, including light communication controls as well as microchip design and manufacturing, is still in an experimental period.

The term LiFi was coined by Harald Haas from the University of Edinburgh in the UK and refers to a type of visible light communication technology that delivers a networked, mobile, high-speed communication solution in a similar manner as WiFi.

Friday, May 4, 2012

100 th Post - Dedicated to Inventor of LED Nick-Holonyak-Jr

 

Nick Holonyak, Jr. (born November 3, 1928, in Zeigler, Illinois) invented the first practically useful visible LED in 1962 while working as a consulting scientist at a General Electric Company laboratory in Syracuse, New York and has been called "the father of the light-emitting diode". He is a John Bardeen Endowed Chair in Electrical and Computer Engineering and Physics and Professor of electrical and computer engineering at the University of Illinois at Urbana-Champaign where he has been since 1963.

Inventions

In addition to introducing the III-V alloy LED, Holonyak holds 41 patents. His other inventions include the red-light semiconductor laser, usually called the laser diode (used in CD and DVD players and cell phones) and the shorted emitter p-n-p-n switch (used in light dimmers and power tools). He helped create the first light dimmer while at GE.
In 2006, the American Institute of Physics decided on the five most important papers in each of its journals since it was founded 75 years ago. Two of these five papers, in the journal Applied Physics Letters, were co-authored by Holonyak. The first one, coauthored with S. F. Bevacqua in 1962, announced the creation of the first visible-light LED. The second, co-authored primarily with Milton Feng in 2005, announced the creation of a transistor laser that can operate at room temperatures. Holonyak predicted that his LEDs would replace the incandescent light bulb of Thomas Edison in the February 1963 issue of Reader's Digest, and as LEDs improve in quality and efficiency they are gradually replacing incandescents as the bulb of choice.

Background

Holonyak's parents were Ukrainian immigrants who settled in Southern Illinois; Holonyak's father worked in a coal mine. Holonyak was the first member of his family to receive any type of formal schooling. He once worked 30 straight hours on the Illinois Central Railroad before realizing that a life of hard labor was not what he wanted and he'd prefer to go to school instead. According to Knight Ridder, "The cheap and reliable semiconductor lasers critical to DVD players, bar code readers and scores of other devices owe their existence in some small way to the demanding workload thrust upon Downstate railroad crews decades ago."
Holonyak was John Bardeen's first Ph.D. student at the University of Illinois at Urbana-Champaign. He received his undergraduate, master's, and Ph.D. (1954) from the same university. He created the first visible semiconductor lasers in 1960. In 1963, he again joined Dr. Bardeen, the co-inventor of the transistor, at the University of Illinois and worked on quantum wells and quantum-well lasers.

University of Illinois

As of 2007, he is the John Bardeen Endowed Chair Professor of Electrical and Computer Engineering and Physics at the University of Illinois at Urbana-Champaign[3] and is investigating methods for manufacturing quantum dot lasers. He has been married to his wife Katherine for 51 years. He no longer teaches classes, but he researches full-time. He and Dr. Milton Feng run a transistor laser research center at the University funded by $6.5 million from the United States Department of Defense through DARPA.
10 of his 60 former doctoral students develop new uses for LED technology at Philips Lumileds Lighting Company in Silicon Valley.

Awards and honors

Holonyak has been presented awards by George H.W. Bush, George W. Bush, Emperor Akihito of Japan and Vladimir Putin.
In 1989, Holonyak received the IEEE Edison Medal for 'an outstanding career in the field of electrical engineering with contributions to major advances in the field of semiconductor materials and devices.' Holonyak's former student, Russell Dupuis from the Georgia Institute of Technology, won this same award in 2007.
In 1995, he was awarded the $500,000 Japan Prize for 'Outstanding contributions to research and practical applications of light emitting diodes and lasers.
In 2003, he was awarded the IEEE Medal of Honor.
He has also received the Global Energy International Prize, the National Medal of Technology, the Order of Lincoln Medallion, and the 2004 Lemelson-MIT Prize, also worth $500,000.[4] He has also received the Frederic Ives Medal of the Optical Society of America.
Many colleagues have expressed their belief that he deserves the Nobel Prize for his invention of the LED. On this subject, Holonyak says, "It's ridiculous to think that somebody owes you something. We're lucky to be alive, when it comes down to it."
On 9 November 2007, Holonyak was honored on the University of Illinois campus with a historical marker recognizing his development of the quantum-well laser. It is located on the Bardeen Engineering Quadrangle near where the old Electrical Engineering Research Laboratory used to stand.
In 2008, he was inducted into the National Inventors Hall of Fame (Announced February 14, 2008) (May 2–3, 2008 at Akron, Ohio






Wednesday, April 25, 2012

Build Garden Greenhouse Using LED Lights


The concept of growing plants in your house has been intriguing for excited gardeners for decades. The green house or indoor horticulture thus became a thrilling field of study to many. People grow plants as a hobby and as a great investment, which enables you to reap profits, if nurtured well.



Wholesome plants and flowers are a sight to behold. The green house route of growing plants has to abide to certain specifications for it to reach your goals. Yet the idea is not impossible or far fetched for followers of plants. The right composition of water and nutrition added with correct temperature control are appropriate setting to develop your plants. One another thing, which also is the most important one, is LED lighting inside of the green house.


LED lights are the new style used in green houses. The comparatively cool lights do not dry up the soil and permits the lights to be positioned closer to the plant life. Instead of keeping them very close to the plants all at once, you can actually move them towards the plants slowly. Although LED lights really do not go hot the way other lighting do, you must keep an eye to see the plants stay safe with out any warnings of over heating.


The suitable use of LED lights leads to the growth of safe and colorful plants and herbs. Other features are the capacities of the room; you want to turn in to a green house, extra lights in the room, and the money you invest. However, make sure you collect details from the provider about the lighting layout, before you make an order. It could possibly also enable you to measure the profits you can make, if you plan to make it a small business.


A soil moisture meter must be already in place to measure the moisture content of the soil. It can help to provide correct level of water to the plants. The method to obtain water too should be tested before you fix your LED. The finest temperature needed for plants to grow is around 68F to 86F, which the not so hot LED lights will be able to create.


When the parameters are attained there is nothing to prevent the veteran gardener from manufacturing beautiful vegetables and flowers.

People wonder if the vast recognition of LED lights is hype; a little something which is blown out of proportion! There is a lot of publicity on these lights and their benefits. Wherever we go we face them; they have become an element of our life. So it is only apt that we perform a little analyzing of LE Ds, to know whether the popularity and guarantees associated with them are original or false.


The noticeably more affordable LED lights are harmonious on environment.


The longer life of LE Ds has made it probably the most selected lighting for homes. It stands unparalleled among all other lightings in its sturdiness and low energy application.

LED lights are not huge, which makes them convenient to fit in otherwise tough to fix areas. The bulky nature of regular lighting makes it difficult to fix them in certain points. LEDs are employed to artistically lighten up displays, show cases and other spots which have to be enhanced. LEDs with firmly targeted lights and of a more normally focused nature is available. You could highlight a painting or a beautiful display using the firmly centered LEDs. It is best if you light up your reading table with LED that contains light of much more spread out nature.


Now it is very clear that LEDs certainly are worthy of the popularity they are given!


Wednesday, April 18, 2012

Led Lighting Methods Generating A Brilliant Future Of Light


No one truly knows how quick LEDs are destined to soar or how bright the future of lighting is estimated to be. 1 issue is for positive, although. The popular light bulb might be a issue of your previous, destined to be found only from the ancient museums of every single state. By the seems of your present scenario, the most recent generation of LED lighting techniques might be dazzling ample for making people today sit up and feel agape about the innumerable energy-saving lighting choices which can be produced on the market within their homes, offices and also other business complexes.

LEDs (Light Emitting Diode) are semi-conductor gadgets that convert electrical power immediately into light. They’re much more efficient than conventional light and although three times more highly-priced than their un-dignified counterparts, LEDs are bound to eliminate their highly-priced cost tag using the onset of new technologies. Incandescent or fluorescent lamps is usually purchased at a bargain but is highly-priced on the operational degree. Alternatively, LEDs are 4 times more efficient than fluorescent lighting and lasts 10 times longer too.

Just a couple of many years back, opportunities for LED lighting techniques did not appear an enticing selection for the housing segment, corporations, industries or municipal sectors, owing to the tremendous buying cost. The sad part is, not many realized the expense financial savings after a while positively outweighed the initial costs of these power saving measures.

Due to unprecedented investments in efficient lighting engineering, LED lights are now more inexpensive for homes and corporations As outlined by a recent industry research, the sale of regular light bulbs in numerous European nations dropped by 35 percent from the initially quarter of 2009, with LEDs accounting for 65 percent of your product sales.

Presently LED finds myriad uses in parking locations, street lights, website traffic lights highways, corporate offices, hotels, public buildings, restaurants, gallery, lounge, vehicles and signboards. When regarded as beneficial only for flashlights and laptop personal computers, LED lighting are now revered because the reigning kings and queens from the dwelling lighting arena too.

LEDs supply twice the efficiency of CFLs or Compact Fluorescent light bulbs and also the complete absence of toxic mercury, prolonged lifespan and more quickly turn-on times make LEDs more attractive than other lighting solutions. It’s been estimated from the Department of Energy that by 2025, LEDs possess the potential to reduce national power consumption for lighting by 29 percent, saving $125 billion about the electrical expenses of U.S. households.

Lately, even the vehicle market is generating a roll more than to LED lighting techniques, specifically for indicator lights about the dashboard and rear lights. Technological advancements in LED have come up with high-flux gadgets that make it possible for LEDs to be applied in innumerable lighting applications, specifically those that call for dynamic focusing.

The future of our planet belongs to power efficient lighting and LEDs will play a pivotal part in generating the planet brighter, greener and self-sufficient. It’s only a matter of time along with a small Analysis and Advancement, ahead of the limitations of LEDs are surpassed and people today from all cross-sections of your society deem it essential to adopt LED lighting techniques to light up their lifestyles.

Tuesday, April 3, 2012

LED - Current Trend

In recent years, China\\ s LED industry is developing rapidly, forming a complete LED industrial chain system in support of national policy and downstream applications, driven by demand. The LED industry chain, including upstream of the substrate, epitaxial wafers and chips, package of midstream and downstream of the lighting, display backlighting and other applications. From the industrial chain, LED lighting has gone beyond the backlight LED market, the fastest growing application market. Following a brief introduction to the future development trend of LED lighting:

A luminous efficiency of continuous improvement and product quality is improving steadily

The luminous efficiency is improved steadily by an average of 15% is expected to reach more than 200lm / W, is estimated to reach from 200lm to / W white LED will be the past two or three years available. View, although the 2011 penetration rate of only 6.6% of the overall LED lighting market, but the future growth potential. Countries in the development of LED lighting have introduced policies and preferential measures, of which 2015, Japan plans to LED accounted for the general lighting market will reach 50% and 30% in South Korea, mainland China for 20 percent, up above the 2015 target, this few years will be up to the first phase of work; In addition, LED technology continues to progress, the U.S. DOE set a target point of view, the 2014 white LED components luminous efficiency will reach 200 lm / W, and the price will drop to about $ 2 / klm manufacturers process will exceed the above values.

Second, lower manufacturing costs and sales prices down

The price of the LED will be an average annual rate of 30% or higher rate of decline. By then, the LED lighting into millions of households will fall into place. With the enhancement of the LED chip, LED luminous efficiency is increased, the single LED chip, the cost continues to drop. Upstream investment-driven large-scale production can release lead to strong market competition will drive chip prices fell, which effectively promote the decline in the cost of LED lighting products. Mainstream LED lighting products, cost structure in light beads cost accounting for about 40%, the drive power of 30%, 20% mechanical / thermal material, and the remaining costs about 10%. Seen the cost of lamp beads, the drive power, and mechanical / thermal material costs basically about 90% of the total cost is the main factor affecting the cost of LED lighting products. Further under the price of upstream raw material prices in the future, LED lighting products is expected to accelerate an alternative to the traditional incandescent lamp, energy saving lighting products.

, High voltage LED will become the future is an important direction

High-voltage LEDs (HV LEDs) has two advantages, one effectively reduces the cost and weight of the LED lighting to significantly reduce the cooling system design requirements, which will solve the lighting market, the biggest technical obstacle. VF voltage, current conditions in the IF completely subvert the traditional low-voltage (LV LED) LED VF low voltage, the IF current requirements. LED lighting due to the HV LEDs SOP may reduce the shape of the heating, lighting structure may tend to be more to save cooling materials, greater than 270 degrees light-emitting, low-cost, light weight. And the high-voltage LED chip group of high-voltage, low current, compared with the general low voltage LED low voltage, high current working environment, HVLEDs work fever was significantly reduced; HVLEDs only need high-voltage constant-current source can be a good , the high-voltage constant-current power transformer, electrolytic capacitor to solve the problem of low-voltage LED driver power supply and electrolytic capacitor life.

Fourth, the COB packaging technology has matured

COB packaging have three advantages: low cost, diversification of application convenience and design. COB packaging Bulb currently occupy about 40% of the LED bulb market, Japan and many domestic enterprises have begun to take the COB package mode. Cost and application point of view, the COB has become the mainstream of the future of lighting design. COB packaging of the LED module is installed in the floor pieces of LED chips, the use of many pieces of the chip can not only improve the brightness, and also help to achieve a reasonable configuration of the LED chip, reduce the amount of current of the input of a single LED chip to ensure high efficiency. And this surface light source can greatly expand the package heat dissipation area, so that the heat is more easy to transfer to the shell. Cost lighting applications with traditional COB light source module can save the cost of the device package, the light engine module production costs and the cost of secondary light distribution. Lighting system in the same function, in general can reduce about 30% of the cost of great significance for the promotion of semiconductor lighting applications. In performance, through reasonable to design and mold making microlens, the COB light source module can effectively avoid the discrete light source device combination existence of points of light, glare and other drawbacks also can be through by adding the appropriate red chip combination in does not reduce the light source efficiency and life under the premise of effectively improve the color rendering (now can do 90 or more). In the application, the COB light source module can make installation of the lighting plant production simpler and more convenient. In production, the existing technology and equipment to support large-scale manufacturing of the high yield of COB light source module. With the expansion of the LED lighting market, lighting demand in the rapidly growing, we can according to the needs of different lighting applications, and gradually formed the mainstream product of the series COB light source module, so that large-scale production.

, LED driver power trends

A downstream product development to the interior lighting industry will be gradually broken down. Such as home lighting, hotel lighting, jewelry, lighting, clothing, lighting, advertising lighting, the industry breakdown of the benefits is to make products more fit practical applications, and highlights the advantages of LEDs in various types of lighting.

2.LED lumens of lighting chip technology to improve the product power requirements reduced.

3.LED drive power gradually to the development of modular, intelligent aspects.

Market from the current domestic-oriented, gradually turning into an international-based.

Six, quick start of the indoor lighting market and development

Morphology and function of the current LED indoor lighting products did not jump out of thinking and patterns of traditional lighting products. A single product, is still to replace the incandescent bulb light and alternative LED fluorescent tube lamp-based. LED light source is different from the traditional, has a small size, fast response characteristics, but also the spectral composition of the discontinuous, single light flux is not high. Interior lighting design, LED and conventional light sources should be mutually reinforcing, complementary advantages, rather than substitutes for one another, who leather whose life relationship. Therefore, the LED of the \"intrinsic\" characteristics of quality decided to external \"form, should not be an alternative form of traditional light sources. LED interior lighting will highlight the three major characteristics:

An intelligent lighting control: the use of intelligent control based on environmental changes, the objective requirements of the user pre-demand conditions while automatically collecting all kinds of information in the lighting system, and the collection of information corresponding to the logical analysis, reasoning, judgment and analysis required in the form of storage, display, transmission, the corresponding state feedback control, in order to achieve the desired results. LED control is flexible, fast response, compact, powerful combination of features and intelligent control system to reflect the characteristics of LED.

(2) a variety of functional lighting: lighting environment and engaged in activities closely related to the lighting to meet the needs of people of different visual functions. For example, in the home life, the party need a bright light; to appreciate classical music or light music, soft lighting. Natural light from morning, noon, evening different color temperature on the people\\ s physical, psychological have a great impact.

Building integrated lighting: lighting products and building materials together, making part of the building into part of the lighting. The lighting in the building integration is buried, embedded in the inside of the building to hide the light source or lighting installation, make full use of the surface reflectance or transmittance of the building, showing the building shape, color. This way not only to hide the lighting pipeline or equipment, piping, but also enable the architectural lighting as an integral part of the whole interior design decoration, the effect of a complete and unified interior space.

7, modular is the way to

At present, many types of domestic LED products with different properties, poor interchangeability, which restricted the healthy development of semiconductor lighting industry, LED industry to normalized serialization, standardization development, improve the overall competitiveness of the LED lighting industry, which became LED business first solve the problem. To this end, the semiconductor lighting industry innovation center in Guangdong Province began construction of the project of standard optical components, domestic 100LED enterprises to participate. What is the meaning of the standard optical components of the project: First of all, any industry or industries to seize the standard-setting to seize the commanding heights of industry development can be the dominant industry chain development, reap the maximum benefit of the industrial chain; Second, the standard optical components standard strategy to try will make Guangdong Province Semiconductor will enable Guangdong Province, stand out in the new round of industrial competition in the semiconductor lighting industry, to seize market opportunities, standard with the standard optical components such as national and international standards to promote and expand the lighting companies of market and technical capacity of an unprecedented double. In the next 10 years, to create a number of one hundred billion \"Philips lighting companies to achieve the goal of\" Thirteen five trillion semiconductor lighting industrial scale.

Saturday, February 18, 2012

Importance of Solid-State Lighting - Led & Oled

Starting with 2003, the U.S. Department of Energy has invested with industry partners in research and development of solid-state lighting (SSL)—including both light-emitting diode (LED) and organic light emitting diode (OLED) technologies. Recently there was a competition, called the "L-Prize," where the U.S. government is offering a $10 million prize, to the company that builds the most efficient bulb with the most pleasing light. Why such concentrated attention on SSL?

The answer is simple: because of SSL's rapid ongoing improvements and superior energy-saving potentialPDF. It is estimated that switching to LED lighting over the next two decades could save the country $120 billion in energy costs over that period, reduce the electricity consumption for lighting by one-fourth, and avoid 246 million metric tons of carbon emission.

Improving cost competitiveness. One major roadblock for SSL is cost. Today, the purchase price of LED lighting products is generally higher than that of their conventional counterparts, often by a long shot, and the energy savings often aren't enough to offset the difference within an attractive payback period. So while LEDs are often not cost effective today, there's a wealth of information showing that they will continue to decline rapidly in price.

There's little doubt that solid-state lighting ultimately will emerge as the technology of choice for an unparalleled variety of applications, because, all things being equal, everyone—building owners included—wants to save energy and protect the environment. Meanwhile, all things are not equal, which is why DOE repeatedly emphasizes that SSL is right for some applications but not for others—and why education and due diligence should be key elements in any lighting specification and purchasing process.

Wednesday, November 16, 2011

Glossary of Typical Lighting Terms

AMPERE : The standard unit of measurement for electric current that is equal to one coulomb per second. It defines the quantity of electrons moving past a given point in a circuit during a specific period. Amp is an abbreviation.

ANSI: Abbreviation for American National Standards Institute.

ARC TUBE: A tube enclosed by the outer glass envelope of a HID lamp and made of clear quartz or ceramic that contains the arc stream.

ASHRAE: American Society of Heating, Refrigerating and Air-Conditioning Engineers

BAFFLE: A single opaque or translucent element used to control light distribution at certain angles.

BALLAST: A device used to operate fluorescent and HID lamps. The ballast provides the necessary starting voltage, while limiting and regulating the lamp current during operation.

BALLAST CYCLING: Undesirable condition under which the ballast turns lamps on and off (cycles) due to the overheating of the thermal switch inside the ballast. This may be due to incorrect lamps, improper voltage being supplied, high ambient temperature around the fixture, or the early stage of ballast failure.

BALLAST EFFICIENCY FACTOR: The ballast efficiency factor (BEF) is the ballast factor (see below) divided by the input power of the ballast. The higher the BEF ( within the same lamp-ballast type ( the more efficient the ballast.

BALLAST FACTOR: The ballast factor (BF) for a specific lamp-ballast combination represents the percentage of the rated lamp lumens that will be produced by the combination.

CANDELA: Unit of luminous intensity, describing the intensity of a light source in a specific direction.

CANDELA DISTRIBUTION: A curve, often on polar coordinates, illustrating the variation of luminous intensity of a lamp or luminaire in a plane through the light center.

CANDLEPOWER: A measure of luminous intensity of a light source in a specific direction, measured in candelas (see above).

CBM: Abbreviation for Certified Ballast Manufacturers Association.

CEC: Abbreviation for California Energy Commission.

COEFFICIENT OF UTILIZATION: The ratio of lumens from a luminaire received on the work plane to the lumens produced by the lamps alone. (Also called "CU")

COLOR RENDERING INDEX (CRI): A scale of the effect of a light source on the color appearance of an object compared to its color appearance under a reference light source. Expressed on a scale of 1 to 100, where 100 indicates no color shift. A low CRI rating suggests that the colors of objects will appear unnatural under that particular light source.

COLOR TEMPERATURE: The color temperature is a specification of the color appearance of a light source, relating the color to a reference source heated to a particular temperature, measured by the thermal unit Kelvin. The measurement can also be described as the "warmth" or "coolness" of a light source. Generally, sources below 3200K are considered "warm;" while those above 4000K are considered "cool" sources.

COMPACT FLUORESCENT: A small fluorescent lamp that is often used as an alternative to incandescent lighting. The lamp life is about 10 times longer than incandescent lamps and is 3-4 times more efficacious. Also called PL, Twin-Tube, CFL, or BIAX lamps.

CONSTANT WATTAGE (CW) BALLAST: A premium type of HID ballast in which the primary and secondary coils are isolated. It is considered a high performance, high loss ballast featuring excellent output regulation.

CONSTANTWATTAGE AUTOTRANSFORMER (CWA) BALLAST: A popular type of HID ballast in which the primary and secondary coils are electrically connected. Considered an appropriate balance between cost and performance.

CONTRAST: The relationship between the luminance of an object and its background.

CRI: (SEE COLOR RENDERING INDEX)

CUT-OFF ANGLE: The angle from a fixture's vertical axis at which a reflector, louver, or other shielding device cuts off direct visibility of a lamp. It is the complementary angle of the shielding angle.

DAYLIGHT COMPENSATION: A dimming system controlled by a photocell that reduces the output of the lamps when daylight is present. As daylight levels increase, lamp intensity decreases. An energy-saving technique used in areas with significant daylight contribution.

DIFFUSE: Term describing dispersed light distribution. Refers to the scattering or softening of light.

DIFFUSER: A translucent piece of glass or plastic sheet that shields the light source in a fixture. The light transmitted throughout the diffuser will be redirected and scattered.

DIRECT GLARE: Glare produced by a direct view of light sources. Often the result of insufficiently shielded light sources. (See GLARE)

DOWNLIGHT: A type of ceiling luminaire, usually fully recessed, where most of the light is directed downward. May feature an open reflector and/or shielding device.

EFFICACY: A metric used to compare light output to energy consumption. Efficacy is measured in lumens per watt. Efficacy is similar to efficiency, but is expressed in dissimilar units. For example, if a 100-watt source produces 9000 lumens, then the efficacy is 90 lumens per watt.

ELECTROLUMINESCENT: A light source technology used in exit signs that provides uniform brightness, long lamp life (approximately eight years), while consuming very little energy (less than one watt per lamp).

ELECTRONIC BALLAST: A ballast that uses semi-conductor components to increase the frequency of fluorescent lamp operation ( typically in the 20-40 kHz range. Smaller inductive components provide the lamp current control. Fluorescent system efficiency is increased due to high frequency lamp operation.

ELECTRONIC DIMMING BALLAST: A variable output electronic fluorescent ballast.

EMI: Abbreviation for electromagnetic interference. High frequency interference (electrical noise) caused by electronic components or fluorescent lamps that interferes with the operation of electrical equipment. EMI is measured in micro-volts, and can be controlled by filters. Because EMI can interfere with communication devices, the Federal Communication Commission (FCC) has established limits for EMI.

ENERGY-SAVING BALLAST: A type of magnetic ballast designed so that the components operate more efficiently, cooler and longer than a "standard magnetic" ballast. By US law, standard magnetic ballasts can no longer be manufactured.

ENERGY-SAVING LAMP: A lower wattage lamp, generally producing fewer lumens.

FC: (SEE FOOTCANDLE)

FLUORESCENT LAMP: A light source consisting of a tube filled with argon, along with krypton or other inert gas. When electrical current is applied, the resulting arc emits ultraviolet radiation that excites the phosphors inside the lamp wall, causing them to radiate visible light.

FOOTCANDLE (FC): The English unit of measurement of the illuminance (or light level) on a surface. One footcandle is equal to one lumen per square foot.

FOOTLAMBERT: English unit of luminance. One footlambert is equal to 1/p candelas per square foot.

GLARE: The effect of brightness or differences in brightness within the visual field sufficiently high to cause annoyance, discomfort or loss of visual performance.

HALOGEN: (SEE TUNGSTEN HALOGEN LAMP)

HARMONIC DISTORTION: A harmonic is a sinusoidal component of a periodic wave having a frequency that is a multiple of the fundamental frequency. Harmonic distortion from lighting equipment can interfere with other appliances and the operation of electric power networks. The total harmonic distortion (THD) is usually expressed as a percentage of the fundamental line current. THD for 4-foot fluorescent ballasts usually range from 20% to 40%. For compact fluorescent ballasts, THD levels greater than 50% are not uncommon.

HID: Abbreviation for high intensity discharge. Generic term describing mercury vapor, metal halide, high pressure sodium, and (informally) low pressure sodium light sources and luminaires.

HIGH-BAY: Pertains to the type of lighting in an industrial application where the ceiling is 20 feet or higher. Also describes the application itself.

HIGH OUTPUT (HO): A lamp or ballast designed to operate at higher currents (800 mA) and produce more light.

HIGH POWER FACTOR: A ballast with a 0.9 or higher rated power factor, which is achieved by using a capacitor.

HIGH PRESSURE SODIUM LAMP: A high intensity discharge (HID) lamp whose light is produced by radiation from sodium vapor (and mercury).

HOT RESTART or HOT RESTRIKE: The phenomenon of re-striking the arc in an HID light source after a momentary power loss. Hot restart occurs when the arc tube has cooled a sufficient amount.

IESNA: Abbreviation for Illuminating Engineering Society of North America.

ILLUMINANCE: A photometric term that quantifies light incident on a surface or plane. Illuminance is commonly called light level. It is expressed as lumens per square foot (footcandles), or lumens per square meter (lux).

INDIRECT GLARE: Glare produced from a reflective surface.

INSTANT START: A fluorescent circuit that ignites the lamp instantly with a very high starting voltage from the ballast. Instant start lamps have single-pin bases.

LAMP CURRENT CREST FACTOR (LCCF): The peak lamp current divided by the RMS (average) lamp current. Lamp manufacturers require <1.7 for best lamp life. An LCCF of 1.414 is a perfect sine wave.

LAMP LUMEN DEPRECIATION FACTOR (LLD): A factor that represents the reduction of lumen output over time. The factor is commonly used as a multiplier to the initial lumen rating in illuminance calculations, which compensates for the lumen depreciation. The LLD factor is a dimensionless value between 0 and 1.

LAY-IN-TROFFER: A fluorescent fixture; usually a 2' x 4' fixture that sets or "lays" into a specific ceiling grid.

LED: Abbreviation for light emitting diode. An illumination technology used for exit signs. Consumes low wattage and has a rated life of greater than 80 years.

LENS: Transparent or translucent medium that alters the directional characteristics of light passing through it. Usually made of glass or acrylic.

LIGHT LOSS FACTOR (LLF): Factors that allow for a lighting system's operation at less than initial conditions. These factors are used to calculate maintained light levels. LLFs are divided into two categories, recoverable and non-recoverable. Examples are lamp lumen depreciation and luminaire surface depreciation.

LIFE-CYCLE COST: The total costs associated with purchasing, operating, and maintaining a system over the life of that system.

LOUVER: Grid type of optical assembly used to control light distribution from a fixture. Can range from small-cell plastic to the large-cell anodized aluminum louvers used in parabolic fluorescent fixtures.

LOW POWER FACTOR: Essentially, an uncorrected ballast power factor of less than 0.9 (SEE NPF)

LOW-PRESSURE SODIUM: A low-pressure discharge lamp in which light is produced by radiation from sodium vapor. Considered a monochromatic light source (most colors are rendered as gray).

LOW-VOLTAGE LAMP: A lamp ( typically compact halogen ( that provides both intensity and good color rendition. Lamp operates at 12V and requires the use of a transformer. Popular lamps are MR11, MR16, and PAR36.

LOW-VOLTAGE SWITCH: A relay (magnetically-operated switch) that allows local and remote control of lights, including centralized time clock or computer control.

LUMEN: A unit of light flow, or luminous flux. The lumen rating of a lamp is a measure of the total light output of the lamp.

LUMINAIRE: A complete lighting unit consisting of a lamp or lamps, along with the parts designed to distribute the light, hold the lamps, and connect the lamps to a power source. Also called a fixture.

LUMINAIRE EFFICIENCY: The ratio of total lumen output of a luminaire and the lumen output of the lamps, expressed as a percentage. For example, if two luminaires use the same lamps, more light will be emitted from the fixture with the higher efficiency.

LUMINANCE: A photometric term that quantifies brightness of a light source or of an illuminated surface that reflects light. It is expressed as footlamberts (English units) or candelas per square meter (Metric units).

LUX (LX): The metric unit of measure for illuminance of a surface. One lux is equal to one lumen per square meter. One lux equals 0.093 footcandles.

MAINTAINED ILLUMINANCE: Refers to light levels of a space at other than initial or rated conditions. This terms considers light loss factors such as lamp lumen depreciation, luminaire dirt depreciation, and room surface dirt depreciation.

MERCURY VAPOR LAMP: A type of high intensity discharge (HID) lamp in which most of the light is produced by radiation from mercury vapor. Emits a blue-green cast of light. Available in clear and phosphor-coated lamps.

METAL HALIDE: A type of high intensity discharge (HID) lamp in which most of the light is produced by radiation of metal halide and mercury vapors in the arc tube. Available in clear and phosphor-coated lamps.

MR-16: A low-voltage quartz reflector lamp, only 2" in diameter. Typically the lamp and reflector are one unit, which directs a sharp, precise beam of light.

NADIR: A reference direction directly below a luminaire, or "straight down" (0 degree angle).

NEMA: Abbreviation for National Electrical Manufacturers Association.

NIST: Abbreviation for National Institute of Standards and Technology.

NPF (NORMAL POWER FACTOR): A ballast/lamp combination in which no components (e.g., capacitors) have been added to correct the power factor, making it normal (essentially low, typically 0.5 or 50%).

OCCUPANCY SENSOR: Control device that turns lights off after the space becomes unoccupied. May be ultrasonic, infrared or other type.

OPTICS: A term referring to the components of a light fixture (such as reflectors, refractors, lenses, louvers) or to the light emitting or light-controlling performance of a fixture.

PAR LAMP: A parabolic aluminized reflector lamp. An incandescent, metal halide, or compact fluorescent lamp used to redirect light from the source using a parabolic reflector. Lamps are available with flood or spot distributions.

PAR 36: A PAR lamp that is 36 one-eighths of an inch in diameter with a parabolic shaped reflector (SEE PAR LAMP).

PARABOLIC LUMINAIRE: A popular type of fluorescent fixture that has a louver composed of aluminum baffles curved in a parabolic shape. The resultant light distribution produced by this shape provides reduced glare, better light control, and is considered to have greater aesthetic appeal.

PARACUBE: A metallic coated plastic louver made up of small squares. Often used to replace the lens in an installed troffer to enhance its appearance. The paracube is visually comfortable, but the luminaire efficiency is lowered. Also used in rooms with computer screens because of their glare-reducing qualities.

PHOTOCELL: A light sensing device used to control luminaires and dimmers in response to detected light levels.

PHOTOMETRIC REPORT: A photometric report is a set of printed data describing the light distribution, efficiency, and zonal lumen output of a luminaire. This report is generated from laboratory testing.

POWER FACTOR: The ratio of AC volts x amps through a device to AC wattage of the device. A device such as a ballast that measures 120 volts, 1 amp, and 60 watts has a power factor of 50% (volts x amps = 120 VA, therefore 60 watts/120 VA = 0.5). Some utilities charge customers for low power factor systems.

PREHEAT: A type of ballast/lamp circuit that uses a separate starter to heat up a fluorescent lamp before high voltage is applied to start the lamp.

QUAD-TUBE LAMP: A compact fluorescent lamp with a double twin tube configuration.

RADIO FREQUENCY INTERFERENCE (RFI): Interference to the radio frequency band caused by other high frequency equipment or devices in the immediate area. Fluorescent lighting systems generate RFI.

RAPID START (RS): The most popular fluorescent lamp/ballast combination used today. This ballast quickly and efficiently preheats lamp cathodes to start the lamp. Uses a "bi-pin" base.

ROOM CAVITY RATIO (RCR): A ratio of room dimensions used to quantify how light will interact with room surfaces. A factor used in illuminance calculations.

REFLECTANCE: The ratio of light reflected from a surface to the light incident on the surface. Reflectances are often used for lighting calculations. The reflectance of a dark carpet is around 20%, and a clean white wall is roughly 50% to 60%.

REFLECTOR: The part of a light fixture that shrouds the lamps and redirects some light emitted from the lamp.

REFRACTOR: A device used to redirect the light output from a source, primarily by bending the waves of light.

RECESSED: The term used to describe the doorframe of a troffer where the lens or louver lies above the surface of the ceiling.

REGULATION: The ability of a ballast to hold constant (or nearly constant) the output watts (light output) during fluctuations in the voltage feeding of the ballast. Normally specified as +/- percent change in output compared to +/- percent change in input.

RELAY: A device that switches an electrical load on or off based on small changes in current or voltage. Examples: low voltage relay and solid state relay.

RETROFIT: Refers to upgrading a fixture, room, or building by installing new parts or equipment.

SELF-LUMINOUS EXIT SIGN: An illumination technology using phosphor-coated glass tubes filled with radioactive tritium gas. The exit sign uses no electricity and thus does not need to be hardwired.

SEMI-SPECULAR: Term describing the light reflection characteristics of a material. Some light is reflected directionally, with some amount of scatter.

SHIELDING ANGLE: The angle measured from the ceiling plane to the line of sight where the bare lamp in a luminaire becomes visible. Higher shielding angles reduce direct glare. It is the complementary angle of the cutoff angle. (See CUTOFF ANGLE).

SPACING CRITERION: A maximum distance that interior fixtures may be spaced that ensures uniform illumination on the work plane. The luminaire height above the work plane multiplied by the spacing criterion equals the center-to-center luminaire spacing.

SPECULAR: Mirrored or polished surface. The angle of reflection is equal to the angle of incidence. This word describes the finish of the material used in some louvers and reflectors.

STARTER: A device used with a ballast to start preheat fluorescent lamps.

STROBOSCOPIC EFFECT: Condition where rotating machinery or other rapidly moving objects appear to be standing still due to the alternating current supplied to light sources. Sometimes called "strobe effect."

T12 LAMP: Industry standard for a fluorescent lamp that is 12 one-eighths (1 inches) in diameter. Other sizes are T10 (1 inches) and T8 (1 inch) lamps.

TANDEM WIRING: A wiring option in which a ballasts is shared by two or more luminaires. This reduces labor, materials, and energy costs. Also called "master-slave" wiring.

THERMAL FACTOR: A factor used in lighting calculations that compensates for the change in light output of a fluorescent lamp due to a change in bulb wall temperature. It is applied when the lamp-ballast combination under consideration is different from that used in the photometric tests.

TRIGGER START: Type of ballast commonly used with 15-watt and 20-watt straight fluorescent lamps.

TROFFER: The term used to refer to a recessed fluorescent light fixture (combination of trough and coffer).

TUNGSTEN HALOGEN LAMP: A gas-filled tungsten filament incandescent lamp with a lamp envelope made of quartz to withstand the high temperature. This lamp contains some halogens (namely iodine, chlorine, bromine, and fluorine), which slow the evaporation of the tungsten. Also, commonly called a quartz lamp.

TWIN-TUBE: (SEE COMPACT FLUORESCENT LAMP)

ULTRA VIOLET (UV): Invisible radiation that is shorter in wavelength and higher in frequency than visible violet light (literally beyond the violet light).

UNDERWRITERS' LABORATORIES (UL): An independent organization whose responsibilities include rigorous testing of electrical products. When products pass these tests, they can be labeled (and advertised) as "UL listed." UL tests for product safety only.

VANDAL-RESISTANT: Fixtures with rugged housings, break-resistant type shielding, and tamper-proof screws.

VCP: Abbreviation for visual comfort probability. A rating system for evaluating direct discomfort glare. This method is a subjective evaluation of visual comfort expressed as the percent of occupants of a space who will be bothered by direct glare. VCP allows for several factors: luminaire luminances at different angles of view, luminaire size, room size, luminaire mounting height, illuminance, and room surface reflectivity. VCP tables are often provided as part of photometric reports.

VERY HIGH OUTPUT (VHO): A fluorescent lamp that operates at a "very high" current (1500 mA), producing more light output than a "high output" lamp (800 mA) or standard output lamp (430 mA).

VOLT: The standard unit of measurement for electrical potential. It defines the "force" or "pressure" of electricity.

VOLTAGE: The difference in electrical potential between two points of an electrical circuit.

WALLWASHER: Describes luminaires that illuminate vertical surfaces.

WATT (W): The unit for measuring electrical power. It defines the rate of energy consumption by an electrical device when it is in operation. The energy cost of operating an electrical device is calculated as its wattage times the hours of use. In single phase circuits, it is related to volts and amps by the formula: Volts x Amps x PF = Watts. (Note: For AC circuits, PF must be included.)

WORK PLANE: The level at which work is done and at which illuminance is specified and measured. For office applications, this is typically a horizontal plane 30 inches above the floor (desk height).

ZENITH: The direction directly above the luminaire (180 angle).

Luminous Efficacy and Color Quality Advances in LED Systems

Light-emitting diodes (LEDs) are a viable alternative to incumbent and emerging lighting technologies in many application areas, including outdoor and general lighting solutions. To lead against other technologies, LEDs must improve to out-compete the alternatives in terms of luminous efficacy and color quality.

Luminous efficacy and proper color rendition is a function of the LED, the thermal management and driver and power-supply efficiency of the luminaire. As a result, lighting solution designers need to consider the complete system.

Luminous efficacy of a source

Luminous efficacy is a measure of how efficiently a light source produces visible light – or the ratio of luminous flux to power. Depending on context, the power can be either the radiant flux of the source's output, or it can be the total electric power consumed by the source. Most often, luminous efficacy of a source is measured in terms of lumens per watt (lm/W), which is increasingly used by standards bodies and regulatory agencies.

For example, the U.S. Department of Energy (DOE) has set hard goals for LED luminous efficacy, seeking to have cost-effective, market-ready warm white LEDs producing 160 lm/W by 2025.

While there is every indication that these goals are achievable — for example Cree's XLamp XM-L LEDs are one of the most efficient on the market right now — LEDs are only one part of LED-based solutions.

Luminous efficacy of the system

Luminaire efficacy should take into consideration the LED's luminous efficacy of a source in light of the relative efficiency of other system components.

For example, "LEDs also require supplementary electronics, usually called drivers," wrote the DOE on its solid-state lighting website. "The driver converts line power to the appropriate voltage (typically between 2 and 4 Vdc for high-brightness LEDs) and current (generally 200 to 1,000 mA), and may also include dimming and/or color-correction controls.

"Currently available LED drivers are typically about 85 percent efficient. So LED efficacy should be discounted by 15 percent to account for the driver." Other system components, including the power supply or the fixture’s overall thermal profile, also will have an effect on the total luminaire efficacy.

At the moment, LEDs are surpassing compact fluorescent lighting in terms of luminaire efficacy. Of course, efficacy by itself is not enough to a make a good and competitive lighting solution. Low-pressure sodium lamps, for example, can outperform LEDs and most other light sources in terms of luminous efficacy, but they have a nearly monochromatic light that poorly renders colors.

Color rendering

For most lighting applications, the light source must accurately reproduce the colors of the objects it illuminates. An example might be down lighting in a kitchen, where one would not want the luminaire to make naturally bright fruit or vegetables seem dull or, perhaps, even spoiled.

Recently, the U.S. National Institute of Standards and Technology, which is part of the Department of Commerce, proposed the Color Quality Scale. This qualitative measurement seeks to improve upon the aging Color Rendering Index (CRI) for comparing the color-rendering capabilities of fluorescent lights, which was introduced more than 40 years ago by the International Commission on Illumination.

However, whether using the newer Color Quality Scale or the CRI, color rendering should be a significant consideration in lighting solution design.